Flex GE 5 R + TB-L 225mm 110V Electric Giraffe Wall & Ceiling Sander

Faster to finish – long-neck sanders can reduce project time due to the combination of speed, surface finish, and minimal rework so you can get the job done sooner

Easier to use – random orbital sanders are less likely to leave surface marks, so need much less practice and re-work to achieve a perfect plasterboard finish

Better handling – lower weight, better tool balance and 180° flexible, open sanding head give you the comfortable control needed when sanding walls, ceilings and into corners

Virtually dust-free sanding – dust extraction through the sanding discs helps to prolong their lifespan, keep the air clear and minimise cleanup

Minimised downtime – virtually maintenance-free brushless motor and detachable power cord for easier on-site servicing. Sanding plate diameter: 225 mm

Weight according to EPTA-Procedure 01/2003 without battery: 3.5 kg

Speed of oscillation - range: 4000 - 8000 tours/minute

Very handy, light-weight machine with optimum ease of operation. Provides

comfortable and ergonomic working conditions

b Revolving edge segment enables the processing of wall/wall and wall/

ceiling surface transitions

b The edge segment rotates by the movement of the machine without any

interruption in work

b Easy guiding: by optimal balance between motor and sanding head

b Reliable force transmission and high flexibility thanks to the flexible drive

shaft from. For decades established “FLEX technology”. Thanks to this

design principle the weight on the head of the Giraffe is reduced to a minimum.

This facilitates handling.

b Electronic: controlled constant speed, soft-start, overload protection and

speed selection with adjuster wheel

b Effective dust extraction from between the brush ring and the sanding

pad prevents clogging of the abrasive and promotes a dust-free working

environment

b Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system

on the guide tube

b Easy handling thanks to ergonomically shaped guide tube made of aluminium.

Optionally an auxiliary handle (accessory) can be attached

b Dust-proof on/off switch

b Very flexible thanks to an optional 500 mm extension (accessory) for high

rooms, can be attached without any tools

b According to the assortment of sanding paper ideally suited for sanding

plaster boards, solid styropor insulation slabs, preparation for painting,

polishing

b Very large areas and rooms up to 3.40 m in height can be processed thanks

to the optional application of the GM 340

b The innovative, textile transport system allows the machine and accessories

to be transported effortlessly. The Giraffe® does not have to be mounted

and is immediately ready for use

b Gimbal-mounted sanding head provides high flexibility and optimum

adjustment for sanding walls and ceilings.