Compliance- CE
- European Directive 1999/5/EC (R&TTE)
- IP67 environmental protection
MaterialsHigh‑impact ABS housing with sealed electronics
Purpose/Made for- Improved utility detection in areas of high signal levels.
- Improved detection of inactive utilities such as streetlights.
- Enables depth estimation, when using a depth estimation cable locator.
- Enables you to locate non-conductive utilities (e.g plastic, concrete etc) when used in conjunction with EZiSYSTEM accessories.
Radio33 kHz primary frequency
RangeUp to 3 m depth
SensitivityHigh‑output 1 W transmitter with 4 selectable power levels
DisplayLED indicators
Accuracy - Depth/Measurement Precision (%)±10
Accuracy - Locate (%)±10–15
Audio Option- Audio Volumes: 85 dBA @ 30 cm
- T one: 8 kHz mode: Low pitched tone, 33 kHz mode: Higher pitched tone, 512 Hz mode (xf models): Low pitched tone, 640 Hz mode (xf models): Low pitched tone
- Induction mode: Pulsed tone, Connection mode: Pulsed tone when poor or no current output, continuous tone when good connection
Audio Output- 8 kHz mode: Low pitched tone
- 33 kHz mode: Higher pitched tone
- 512 Hz mode (xf models): Low pitched tone
- 640 Hz mode (xf models): Low pitched tone
- Induction mode: Pulsed tone
CleaningDry the product, the transport container, the foam inserts and the accessories at a temperature not greater than 40°C / 104°F and clean them. Do not repack until everything is completely dry. eep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.
Contents - KitEziCAT Cable and Pipe Locators
DesignRugged, ergonomic, weather‑sealed transmitter
EnvironmentalIP67 waterproof and dustproof
European Directives1999/5/EC (R&TTE)
External/Wired ConnectionConnection Mode cable set
External/Wireless ConnectionRadio frequencies: 33kHz is the most efficient, Bluetooth
LED Indications- 2 LED Mode Indicators
- 2 LED Frequency Indicators (Standard)
- 4 LED Frequency Indicators (xf models).
- LED Battery Status Indicator
- 3 LED Power Output Indicators
ManufacturingGeoMax AG
Mode Control4 membrane push buttons
Operation4 membrane push buttons
Operation Modes (Hz)- 8.192 (8) kHz or
- 32.768 (33) kHz
- 512 (512) Hz (xf models)
- 640 (640) Hz (xf models)
Output - InductionUp to 1W max
Output Signal LevelAudio Volumes: 85 dBA @ 30 cm
Power ButtonSingle membrane switch
Power Signals (P)4 selectable power levels
Radio Signals (R)33 kHz induction
Recommended Service Interval (months)12
Service IndicatorAnnual service indicator
StorageRespect the temperature limits when storing the equipment, particularly in summer if the equipment is inside a vehicle. Refer to 10 Technical Data for information about temperature limits. If the equipment is to be stored for a long time, remove the alkaline batteries from the product in order to avoid the danger of leakage.
Time - Start-Up (s)<2
Visual IndicationLED indicators for mode, frequency, power, and battery